Help for Port Security

Help for Port Security Administration

Configurable Data

• Port Security Mode - Enables or disables the Port Security feature.

Command Buttons

• Submit - Applies the new configuration and causes the changes to take effect. These changes will not be retained across a power cycle unless a save configuration is performed.

Help for Port Security Violation Status

Selection Criteria

• Unit/Slot/Port - Select the physical interface for which you want to display data.

Non-configurable data

• Last Violation MAC Address - Displays the source MAC address of the last packet that was discarded at a locked port.
• VLAN ID - Displays the VLAN ID corresponding to the Last Violation MAC address.

Help for Port Security Interface Configuration

Selection Criteria

• Unit/Slot/Port - Selects the interface to be configured.

Configurable Data

• Port Security - Enables or disables the Port Security feature for the selected interface.
• Maximum Dynamic MAC Addresses allowed - Sets the maximum number of dynamically learned MAC addresses on the selected interface.
• Add a static MAC address - Adds a MAC address to the list of statically locked MAC addresses for the selected interface.
• VLAN ID - Adds a corresponding VLAN ID for the MAC Address being added to the list of statically locked MAC addresses for the selected interface.
• Maximum static MAC Addresses allowed - Sets the maximum number of statically locked MAC addresses on the selected interface.
• Enable violation traps - Enables or disables the sending of new violation traps designating when a packet with a disallowed MAC address is received on a locked port.

Command Buttons

• Submit - Applies the new configuration and causes the changes to take effect. These changes will not be retained across a power cycle unless a save configuration is performed.
• Move - Converts a dynamically learned MAC address to a statically locked address. The Dynamic MAC address entries are converted to Static MAC address entries in a numerically ascending order until the Static limit is reached.

Help for Port Security Statically Configured MAC Addresses

Selection Criteria

• Unit/Slot/Port - Select the physical interface for which you want to display data.
• VLAN ID - selects the VLAN ID corresponding to the MAC address being deleted.

Configurable data

• MAC Address - Accepts user input for the MAC address to be deleted.

Non-configurable data

• MAC Address - Displays the user specified statically locked MAC address.
• VLAN ID - Displays the VLAN ID corresponding to the MAC address.
• Delete a Static MAC Address - Deletes the MAC address from the Port-Security Static MAC address table.
• VLAN ID - Displays the VLAN ID corresponding to the MAC address to be deleted from the Static list.

Command Buttons

• Submit - Applies the new configuration and causes the changes to take effect. These changes will not be retained across a power cycle unless a save configuration is performed.

Help for Port Security Dynamically Learned MAC Addresses.

Selection Criteria

• unit/slot/port - Select the physical interface for which you want to display data.

Non-configurable data

• MAC Address - Displays the allowable MAC address learned on a specific port.
• VLAN id - Displays the VLAN id corresponding to the MAC address.

Help for Port Mac Deny Interface Configuration

Selection Criteria

• unit/slot/port - Selects the interface to be configured.

Configurable Data

• Enable MAC Deny Feature - Used to enable or disable the MAC Deny Fe ature for the selected interface.
• Add a static MAC address and vlan id- Adds a MAC address and a corr esonding vid to the list of statically locked MAC addresses for the selected int erface.
• Maximum static MAC Addresses allowed- Sets the maximum number of dy namically locked MAC addresses on the selected interface.

Command Buttons

• Submit - Applies the new configuration and causes the changes to take effect.These changes will not be retained across a pow er cycle unless a save configuration is performed.

Help for Port Denied MAC addresses display

Selection Criteria

• unit/slot/port - Selects the interface to be configured.

Non-configurable data

• MAC Address - Displays the MAC addresses learned on a specific port.
• VLAN ID - Displays the VLAN ID corresponding to the MAC address.
• Number of Dynamic MAC addresses learned - Displays the number of dynamically learned MAC addresses on a specific port.

Configurable Data

• Delete the MAC address and vlan id- Deletes a MAC address and the c orresonding vid from the list of denied MAC addresses for the selected interface .

Command Buttons

• Submit - Applies the new configuration and causes the changes to ta ke effect.These changes will not be retained across a power cycle unless a save configuration is performed.

Help for CPU Multicast Rate Configuration

Selection Criteria

• unit/slot/port - Selects the interface to be configured.

Configurable Data

• Admin Mode - Specifies whether Admin mode is enabled on the switch. Value is enabled or disabled.
• CPU Multicast Rate- Sets the CPU Multicast Rate.