Step 2.NAT Setting

You can use NAT to allow PCs from LAN subnet for accessing Internet
  • LAN IP Setting
    LAN IP Address
    Subnet Mask
    DHCP Server Enable
    Assigned DHCP IP Address
    Start IP:
     
    End IP :
    DHCP IP Lease Time seconds (60..864000)

    • WLAN Enable
    WLAN Mode
    WLAN SSID    Hide SSID
    WLAN Frequency Auto    (default: Channel 6 )
    Authentication Method (default: OPEN )
    Encryption Type
    WEP Encryption Length

    64-bit WEP: Enter 5 ASCII characters or 10 HEX characters ("0-9", "A-F") for each Key (1-4).
    128-bit WEP: Enter 13 ASCII characters or 26 HEX characters ("0-9", "A-F") for each Key (1-4).

    Key 1
    		HEX ASCII    
    Key 2
    		HEX ASCII    
    Key 3
    		HEX ASCII    
    Key 4
    		HEX ASCII    
    WPA Pre-Shared Key (8~63 ASCII or 64 HEX characters)
    IP Address
    Port Number (1024-65535, default 1812)
    Shared Secret